china mobile secret codes
CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send

Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes 3xx, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motorola:
Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
ZTE Mobile1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatelE205
unlocking phone code,only press***847# without simcard

E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes “Chinese” models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and “yes””

………………………………………….. ………………………….
N95Pda and N95S Pinout
2×5
4:Rx
5:TX
6:GND
………………………………………….. ………………………….
K1 Moto Pinout
4:Rx
5:Tx
6:Gnd
………………………………………….. ………………………….
PDA ZT6618
1……..8 pin mini Conector
3:Rx
4:TX
5:Gnd
………………………………………….. ………………………….
Cect 8380
1……….8 pin mini Conector
1:Gnd
2:Rx
3:Tx
………………………………………….. ………………………….
KG-200
4:Gnd
3:Tx
2:Rx
………………………………………….. ………………………….
N91I
1…………..12 pin Connector
.
5:Gnd . 12:Tx
6:Tx . 13:Rx
7:Rx .
==============================================
All Chinese Mobile Code And Pinouts
——————————————————
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes 3xx, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motorola:
Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
ZTE Mobile1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatelE205
unlocking phone code,only press***847# without simcard

E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes “Chinese” models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and “yes””

………………………………………….. ………………………….
N95Pda and N95S Pinout
2×5
4:Rx
5:TX
6:GND
………………………………………….. ………………………….
K1 Moto Pinout
4:Rx
5:Tx
6:Gnd
………………………………………….. ………………………….
PDA ZT6618
1……..8 pin mini Conector
3:Rx
4:TX
5:Gnd
………………………………………….. ………………………….
Cect 8380
1……….8 pin mini Conector
1:Gnd
2:Rx
3:Tx
………………………………………….. ………………………….
KG-200
4:Gnd
3:Tx
2:Rx
………………………………………….. ………………………….
N91I
1…………..12 pin Connector
.
5:Gnd . 12:Tx
6:Tx . 13:Rx
7:Rx .

There are many factors that make blogs much better than normal WebPages including the speed at which blogs are indexed, ability to submit to blog directories & normal directories, pings and track backs. All these little things can help drive more traffic to blogs. Here are 15 popular techniques you can use:

1. Create at least four keyword posts per day. Most of the top blogs such as Boing Boing, Daily Kos, and Instapundit (with literally tens of thousands of visitors per day) publish an average of 30 small 100-150 word posts per day according to “Secrets of the A-list Bloggers: Lots of Short Posts” by TNL.net

2. Submit to My Yahoo! When you submit your own RSS to My Yahoo it is indexed by Yahoo.

3. Submit to Google’s Reader. When you submit your own blog RSS to Google’s Reader the Google Blog Search will index your site.

4. Add a relevant link directory to your blog and trade links like a demon possessed! Although it may take more time than simply submitting to a search engine one time, this method is perhaps the best way to drive traffic to your site. Use software such as Zeus to speed up the link trading process.

5. Use ping sites like ping-o-matic. Ping your site every time you add a new post.

6. Submit your blog to traditional search engines such as AltaVista, and MSN.

7. Submit your blog to traditional directories such as DMOZ. Directories (particularly DMOZ) increase relevance with Google. DMOZ is very picky, but what do you have to lose by trying?

8. Submit to as many RSS Directories and Search Engines as possible. This is a simple but repetitive process that can be done with software such as RSS SUBMIT.

9. Comment on other blogs. Do not just leave short, lazy comments like “I agree.” Leave well thought out replies that will force readers to wonder “who wrote this?”

10. Use track backs. If there is a blog that you refer to or quote and it is highly relevant to your subject, leave a track back. It increases your link popularity and may even score a few interested readers from the linked site.

11. Go offline. Use newspaper ads, public bulletin boards, business cards, even stickers to let as many people as possible know your blog exists.

12. Add a link to your blog in your e-mail signature block.

13. Use Groups (Usenet). Find a relevant group on Google groups, Yahoo groups, MSN groups or any of the thousands of other FREE group services and find like minded people and talk with them. Make sure to use your blog URL like it is your name.

14. Use Forums. Forums are one of the best places to go for advice. Go to forums and find problems to solve. Make sure you leave your blog name, but be tactful about it; some forums get annoyed with those who selfishly drop a few links to their own site and leave.

15. Tag your website. Tagging is a new idea that has erupted across the web. Sites like Del.icio.us, Technorati and many others have a social feature that allows you to place your article under keywords or “tags” that everyone interested in that tag can see.

Here’s a simple firefox trick for a faster browsing.Firefox saves last 50 visited websites of a single session in the memory and you can quickly access those already visited websites next time you open your browser.

However, 50 websites seem a lot to me and I think there’s no need to save so many websites in the memory as I hardly visit the websites I visited a while ago.The trick is quite simple.Just type about:config in the firefox address bar and then search for this term.

browser.sessionhistory.max_entries

Double click on this term and change it’s default value, which is 50 to a lower value.I’ve set it to 10.You may set the value according to your needs.

Warning : please be carefull when changing the config settings.

Just came across this page at StopBadware, which says that version 10.5 and 11 of RealPlayer is a ‘badware’. StopBadware is a Google-backed firm that gives analysis of websites and softwares etc. says users should steer clear of RealPlayer 10.5 and 11, but Real disputes their analysis.

The site says that Real needs to more conspicuous about its intentions to install the message center application in RealPlayer 10.5, and the Rhapsody Player Engine in RealPlayer 11. It recommends that users install neither version until the issues are fixed.

The message center is something that consumers have apparently complained heavily about, and has actually been made optional in RealPlayer 11. Calling it “advertising software,” StopBadware says that the company fails to fully disclose its intentions. However, in an interview with BetaNews, Real corporate communications head Bill Hankes called the description a stretch of the truth. The only things it “advertises” are updates to Real software and applications: no third-party advertisements appear.

“That’s incorrect. In RealPlayer 11, you can decline the message center,” he said. “Earlier versions were criticized by customers who said the message center was intrusive, so in this version we made it optional.”

A second charge by StopBadware was that RealPlayer 11 fails to uninstall all functionality if the user chooses to remove the software. What remains is the Rhapsody Player Engine, which allows for the playback of files encapsulated in Real’s DRM scheme. Hankes described this issue as more of an oversight on Real’s part. “We actually learned about the issue from this report,” he said, saying that the characterization of Real deceptively installing software “was a bit harsh.” It would be fixed in a future update.